8 Relay Module With Opto Isolation Supports 5V AVR / 51 / PIC Microcontroller PLC Relay

8 Relay Module With Opto Isolation Supports 5V AVR / 51 / PIC Microcontroller PLC Relay

บอร์ดรีเลย์ 5V 8 ช่อง ระบบ Isolation with Optocoupler ทำงานแบบ Active Low

  8-channel relay output module , relay output contact max 250V 10A. Input IN1, IN2, IN3, IN4, IN5, IN6, IN7, IN8 signal line active low. VCC, GND power input can be individually powered relay relay power input JD-VCC.

 Purpose:

 1. supports all MCU control .

 2. the industrial field.

 3. PLC control.

 4. smart home control.

 Features:

  - Using a large current relay , AC250V 10A DC30V 10A
  - Contact some independent wiring , safe and reliable
  - Standard interface that can be extended in a variety of development board
  - With fixed screw holes for easy installation
  - Suitable for a variety of platforms 51/AVR/AVR/ARM
 

Module Description :
 1. the module complies with international safety standards, the control area and the load region isolation trench.
 2. using double-sided FR-4 circuit board design , high-end chip production process.
 3. using loose music authentic relay control.
 4. with relay instructions , pull off, disconnect does not shine.
 5. there are low-level signal input signal, the common terminal will start with regular conduction.
 6. the relay can control the various devices and the load.
 7. 8 and 8 normally open normally closed contact.
 8. blue KF301 terminals to the control line is more convenient.
 9. Module size : 138m * 56mm * 18.5mm ( L * W * H ) , Weight : 120g
 10. with 4 fixing bolt holes , hole 3.1mm, pitch 131mm * 49.5mm
 11. finished through 100% functional testing and stability testing

Module interface :
 1. VCC: 5V power supply connected to the positive
 2. GND: 5V power supply connected to the negative
 3. IN1-IN8: signal triggers the end , active low

Relay outputs : There are 12 line interface, all interfaces can be connected directly leads, user-friendly
 1. NO1 - NO8: normally open relay interface, the relay becomes vacant before , pull short after the COM
 2. COM1 - COM8 Relay Common Interface
 3. NC1 - NC8: normally closed relay interface relay shorted to COM before , pull vacant post